PART NO : AP0633T

33213
Timken Outer Cup & Cone Bearing Kit

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

MERITOR EQUIVALENT :
AP0633M

APPLICATION
BPW : EHZ9000
BPW 6.5 - 9 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
BPW 10 - 12 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
BPW 10 - 12 Tonne : HL, HLS, HR, KH/HR, NH, NR, HL, HLS.

SPECIFICATIONS
Cone Part Number : X33213
Cup Part Number :  Y33213
Design Units : Metric
Bearing Weight :  2kg
Cage Type :  Stamped Steel

BEARING DIMENSIONS
d - Bore :  65.000 mm
D - Cup Outer Diameter :  120.000 mm
B - Cone Width  :  41 mm
C - Cup Width  :  32.000 mm
T - Bearing Width  :  41.000 mm

ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 :  2.030 mm
r - Cup Backface "To Clear" Radius2 :  1.52 mm
da - Cone Frontface Backing Diameter :  73.91 mm
db - Cone Backface Backing Diameter :  78.99 mm
Da - Cup Frontface Backing Diameter :  115.10 mm
Db - Cup Backface Backing Diameter :  106.93 mm
Ab - Cage-Cone Frontface Clearance :  3.6 mm
Aa - Cage-Cone Backface Clearance :  2.8 mm
a - Effective Center Location3 :  -11.2 mm

BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)⁴ :  67900 N
C1 - Dynamic Radial Rating (1 million revolutions)⁵ :  262000 N
C0 - Static Radial Rating :  280000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)⁶ :  45400 N

FACTORS
K - Factor⁷ :  1.5
e - ISO Factor⁸ :  0.39
Y - ISO Factor⁹ :  1.54
G1 - Heat Generation Factor (Roller-Raceway) :  90.3
G2 - Heat Generation Factor (Rib-Roller End) :  21.8
Cg - Geometry Factor :  0.0791